FS PBX-C301 Скачать руководство пользователя страница 39

Страница: 39 / 113

IP PBXs USER MANUAL

www.fs.com

Click on the

button to configure the BRI trunk when needed.



Call recording

: To enable or disable call recording on the trunk/trunks. To enable recording you have options to record inbound

calls only, outbound calls only or both inbound and outbound calls.



Overlap Dial

: Overlap dialing mode (sending overlap digits).



Outbound CID

: The number you want to display to the called party.



Reset Interval

: To set the time in seconds between restart of unused B channels.



Pri Indication

: To enable this to report Busy and Congestion on a BRI using out-of-band notification.



Switch Type

: To set the type of PRI switch being used by the telephony provider.



Prompts Language

: Custom a system voice prompts language for the callers calling in from this trunk.



Fax Detect

: To enable/disable fax detection on this trunk.



Dial Permission

: Custom dial permission for this trunk, by default it uses the “Extension” dial permission. Configure only if this

trunk is used for PBX integration, so calls coming from the other side can dial out from this IPPBX trunk directly. DO NOT change

unless you fully understand how this feature works.



Preferred outbound CID

: To set preferred outbound CID of this trunk of the extensions.

6.1.4

SIP Trunks

Path:

Telephony -> Outbound Control -> Trunks

Asterisk PBX can be registered as a SIP user agent to a SIP proxy (provider). If you have subscribed to a VoIP service from an ITSP (Internet

Telephony Service Provider), then with the account details provided by them you can configure a SIP trunk on your IPPBX system for the

user extensions to share and make outbound phone calls.

Содержание PBX-C301


















































































































Результаты поиска

Содержание PBX-C301

Отзывы:

FS PBX-C301, Руководство пользователя, Страница: 39 / 113

Результаты поиска

Содержание PBX-C301

Отзывы: