FS PBX-C301 Скачать руководство пользователя страница 110

Страница: 110 / 113

IP PBXs USER MANUAL

www.fs.com

106

calls, please make sure there’re no phone calls going on before restarting the IPPBX system.

With v3.0.2 software, the time it takes to reboot each of the IPPBX model is listed below.

PBX-C301

PBX-C302

PBX-C503

Phone call

2mins

1.5mins

Web UI

4mins

2mins

13.5.2

Reset

Path:

Maintenance -> Reboot and Reset

To reset PBX-C301 please refer to below 3 reset methods (

Method 1

Method 2

and

Method 3

To reset PBX-C302 and PBX-C503 there’s only 1 way, please refer to

Method 1

: Reset from web UI

Resetting the IPPBX system

Click on

button and confirm with the popup window, reset process will begin. During the reset process the IPPBX system will

restart and the whole process will take around 4 to 5mins for PBX-C301, 2 to 3mins for PBX-C302 and PBX-C503.

Before resetting you may enable options “I’d like to keep the network profiles” and “I'd like to keep the call logs and recordings”, so after

resetting you may still access the IPPBX system web UI from the same IP with all your call logs and recordings remain untouched. If

network profiles had been reset too, you’ll need to access the IPPBX system via the default IP address.

WAN default IP: 192.168.1.100 / LAN Default IP: 192.168.10.100

After resetting when you access the web UI you’ll first see the quick setup wizard. If you choose to use backup file to restore the system

configurations, you may skip the quick setup wizard. If you wish to configure a fresh new phone system, you may follow the wizard to

complete the configurations.

Notice

Reset from web UI will clear all system configurations, except if you have enabled “I’d like to keep the network profiles” and “I’d like to

keep the call logs and recordings” options which will keep the network configurations and the call logs and call recordings.

By default backups will be kept, so after resetting from web UI you may restore backup directly from the IPPBX system.

Method 2

: Reset by RST button at system running stage (PBX-C301 only)

When the PBX-C301 IPPBX system is running, the SYS LED indicator winks once every 2 seconds. Now you may press and hold the RST

button on the back panel of the IPPBX for about 7 seconds, then the SYS LED will go off, the IPPBX system will reboot and start the reset

process.

Reset PBX-C301 IPPBX this way is the same as resetting from the web UI. Only difference would be you cannot choose to keep the

network profiles, call logs and recordings, and you will need to access the IPPBX system via the default IP.

Method 3

: Reset by RST button at system booting stage (PBX-C301 only)

Reset the PBX-C301 IPPBX system by RST button at system booting stage will erase everything on the IPPBX system, including backups

will be erased as well. Resetting this way will fully recover the IPPBX system to factory defaults.

So if you wish to restore the IPPBX configurations with a previous backup, please download it to you operating system first before

resetting.

To reset the PBX-C301 IPPBX system at system booting stage, you need to first cut off the power supply. Press and hold the RST button

then power it on. 4 to 5 seconds later when SYS LED goes on release the RST button.

Around 5mins later access the IPPBX system via the default IP address. You’ll first be directed to the quick setup wizard page, you may

start configuring a fresh new phone system or you may skip and upload offline backup to restore previous configurations.

Содержание PBX-C301


















































































































Результаты поиска

Содержание PBX-C301

Отзывы:

FS PBX-C301, Руководство пользователя, Страница: 110 / 113

Результаты поиска

Содержание PBX-C301

Отзывы: