FS PBX-C301, Руководство пользователя, Страница: 38 / 113

IP PBXs USER MANUAL
www.fs.com
34
 Call recording : To enable or disable call recording on the trunk/trunks. To enable recording you have options to record inbound
calls only, outbound calls only or both inbound and outbound calls.
 Overlap Dial : Overlap dialing mode (sending overlap digits).
 Outbound CID : The number you want to display to the called party.
 Reset Interval : To set the time in seconds between restart of unused B channels.
 Pri Indication : To enable this to report Busy and Congestion on a PRI using out-of-band notification.
 Switch Type
: To set the type of PRI switch being used by the telephony provider.
 Prompts Language : Custom a system voice prompts language for the callers calling in from this trunk.
 Fax Detect : Enable/disable fax detection on this trunk.
 Dial Permission : Custom dial permission for this trunk, by default it uses the “Extension” dial permission. Configure only if this
trunk is used for PBX integration, so calls coming from the other side can dial out from this IPPBX trunk directly. DO NOT change
unless you fully understand how this feature works.
 Preferred outbound CID : To set preferred outbound CID of this trunk of the extensions.
 Quick Send Number : When enabled, your calls will get through faster, as all numbers sent through this trunk will always be added
with“#” at the end, it will cause the carrier to switch the calls immediately instead of waiting till digits timeout.
6.1.3 BRI Trunks
Path: Telephony -> Outbound Control -> Trunks
If your PBX-C302 or PBX-C503 IPPBX system has 4BRI module installed, you’ll have 4 BRI trunks available for inbound and outbound
phone calls.