EN
OCS409 User manual
9
Setup receivers
OCS409 has a relative high output power level. Because of this the connected receiver will work
only if the line attenuation is about 20 dB. You can reach this by using loop trough outlets,
attenuators or a coax cable of the suited length.
The configuration tool offers different frequency steps for selection.
For the use of the „ASTRA_PNP_V2“ - step, in general all receivers on the market are pre-
configured. You just need to connect these devices to your installation.
But if you want to use the special advantages of OCS409, you have to setup each connec-
ted receiver to the selected configuration.
Modern receivers have functions to transfer configurations simply to other similar devices.
9
SETUP RECEIVERS
24
