EN
OCS409 User manual
•
Tabulator
•
Symbol rate
•
Tabulator
•
Additional user information (actually the symbol rate belongs to the user information,
but this may be changing)
The transponder content information has only one requirement.
It must start with 1 to 4 tabulators. One tabulator is a MUST. All further tabulators are for
an optical output format.
The line length should not exceed 80 chars, so it is good printable.
Each line of the transponder content ends with a carriage return (and/or) line feed.
To finish the transponder content part, an empty line is necessary.
The file name should be as short as possible. Do not use special chars for the file name, they
could cause misunderstanding. For separating parts in the file name, underlines are the best.
To add these lists to the configuration tool they only need to copy them to the channel list
folder in the application path.
During the program start they will be detected and automatically implemented.
Editing in Configtool:
By selecting the entry
„satellite“
from main menu you have options to create a new satellite,
edit or delete an existing.
After click to the entry
„edit“
a window for selecting the wanted satellite list opens. The list
can be found in folder
„Channellists“
.
After that the editor window opens.
Here you can edit each data line separately.
11
CREATING SATELLITE TRANSPONDER LISTS
33
