background image

1-2

 

1.3  Computer Information

 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC rules.  While this device is a verified Class A device, it has been 
shown to meet the Class B limits.  These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment.  This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instruction manual, may cause harmful interference to radio communications.  Operation of 
the equipment in a residential area is likely to cause harmful interference in which case the user will 
be required to correct the interference at their own expense. 
 
The user is cautioned that any changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate the equipment. 
 
If necessary, the user should consult the dealer or an experienced radio and television technician for 
additional suggestions. 
 
The user may find the following booklet prepared by the Federal Communications Commission 
helpful:  "How to Identify and Resolve Radio-TV Interference Problems".  This booklet is available 
from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

 

 

 

1.4  Shipping Damage Claim Procedure 

 

 

What to do if your equipment arrives damaged:

 

 
Please note that this equipment was carefully inspected and packed by skilled personnel before 
leaving the factory. The freight company assumes full responsibility for safe delivery upon 
acceptance of the equipment. 
 
1.  File Claim for Damages Immediately—Regardless of extent of damage. 
 
2.  Visible Loss or Damage—Be sure this is noted on the freight bill or express receipt and is signed 

by the person making the delivery.

 

 
3.

 

Concealed Loss or Damage—If damage is unnoticed until equipment is unpacked, notify the 
freight company or carrier immediately and file a concealed damage claim. This should be done 
within 15 days of date of delivery. Be sure to retain container for inspection. 

 
 

1.5  Maintenance/Repair Information

 

 

Place parts orders directly with your local Frymaster Authorized Servicer. A list of Frymaster

 

Factory Authorized Servicers (FAS’s) is located on the Frymaster website at 

www.frymaster.com

. If 

you do not have access to this list, please contact the Frymaster Service Department at 1-800-551-
8633 or 1-318-865-1711. 
 
 
 

Содержание Rethermalizer FGP55





























Отзывы: