Frymaster Rethermalizer FGP55, Инструкция по установке и эксплуатации, Страница: 10 / 28

2-1
FGP55 SERIES RETHERMALIZERS
CHAPTER 2: INSTALLATION
2.1 General
Proper installation is essential for the safe, efficient, trouble-free operation of this appliance.
Any unauthorized alteration or improper installation of this equipment will void the
Frymaster warranty.
DANGER
The electrical power supply for this appliance
MUST
be the same as indicated on
the rating and serial number plate located on the inside of the fryer door.
DANGER
This appliance
MUST
be connected to the voltage and phase as specified on the
rating and serial number plate located on the inside of the fryer door.
DANGER
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance.
All installation and service on Frymaster equipment must be performed by qualified, certified,
licensed, and/or authorized installation or service personnel.
Service may be obtained by contacting your local Factory Authorized Servicer.
In the event of a power failure, the rethermalizer will automatically shut down. Do not attempt to
start the rethermalizer until power is restored.
This appliance must be kept free and clear of combustible material, except that it may be installed on
combustible floors.
A clearance of 6 inches (15cm) must be provided at both sides and back adjacent to combustible
construction. A minimum of 24 inches (61cm) should be provided at the front of the equipment for
servicing and proper operation.
WARNING
Do not block the area around the base or under the rethermalizer.