BYTE 4:
Repeat Mode - three selections: 00h = repeat the entire IR command, 01 = repeat the IR header only once,
02h = repeat the IR command with an offset. Default is 00h.
BYTE 5:
Offset – displays which section of the IR burst was learned.
01 = Learn Universal code
02 = Learn Universal code w/1 skip
03 = Learn Universal code w/2 skips
BYTE 6:
Data Length – displays the size of the data string in Hex form including the header.
12. Enter Command
The Enter Command interface lets you test proper connection and function by entering and executing command strings.
You can use this to verify the correctness of a command before you enter it into an Action. For serial commands, it can
also be used to see any data returned from the remote device.
•
Choose
Enter Command
•
Select a test command from the drop-down menu (the test command will appear in the
Send Command
window):
•
For Serial:
•
Serial Transmit - #COMxx[“”] TX
•
Serial Receive - ‐ #COMxx[] RX
•
For Infrared:
•
IR- Out Universal Command- #XROxx[F2] output
•
Learn Universal IR code - ‐ #XRI1 [F2] input (universal header uses fixed 40K, user can modify)
•
For TCP:
•
NET Command (TCP) - ‐ #NET[F1,...]
•
For test command:
•
Alarm Command #ALM[”ON”]
•
Click
Send CMD
•
The Receive Command field is populated when it receives a response back from a connected serial device
23
Содержание CB6000
Страница 1: ...CB6000 Installer Guide ...
