Frontier DM1160, Руководство оператора

Страница: 41 / 68

Instructions for work
39
DM1160
2. Adjustments in working position

Cutting height
The desired cutting height is obtained directly by
adjusting the top link length. The height can be adjusted
between 30 and 80 mm (1.1’’ - 3.1’’) depending on the
tractors.
To obtain a different cutting height:
- Place the machine in working position.
- Lower the machine on the ground to remove weight
from the top link.
- Modify the top link length to alter the machine tilt
angle.
- Place the machine in working position to check cutting
height.
-
Too low a cutting height can lead to:
Excessive disk and knife wear.
Crop being contaminated by soil.
Delay in regrowth.
L1
L2