manualshive.com logo in svg

Frontier DM1160, Руководство оператора

Поделиться
Скачать
Frontier DM1160 Скачать руководство пользователя страница 19

Safety

17

DM1160

Description of safety decals

Operating instructions (1)

The operators' manual contains all the information

necessary for using the machine safely. It is imperative
to read and comply with all instructions.

Working on the machine (2)

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the
PTO drive, turn off the engine, remove ignition key and
wait until all moving parts have come to a complete stop
and apply park brake.

Projections (3)

Stones and other debris projected by the moving parts

can travel a long distance. The protection covers must
always be in position and in good condition. Always stay
at a safe distance from the machine.

BEFORE STARTING THE

MACHINE READ OPERATOR’S

MANUAL AND SAFETY

INSTRUCTIONS.

REQUEST COPY IF NOT

SUPPLIED.

CAUTION

BEFORE ADJUSTING
MAINTAINING OR REPAIRING
THE MACHINE, TURN OFF THE
ENGINE, REMOVE IGNITION
KEY AND WAIT UNTIL ALL
MOVING PARTS HAVE COME TO
A COMPLETE STOP.

599 004 20

Содержание DM1160





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды