Frontier DM1160, Руководство оператора

Страница: 61 / 68

Maintenance and storage
59
DM1160

Knife replacement
Clean the nut case.
Place a wooden wedge between two disks to stop them
from rotating.
Loosen nut using box wrench supplied with the machine.
Remove bolt through opening located at the front of the
disk guard.
Knives can be turned over on the same disk to use the
other cutting edge or replaced. On each knife, an arrow
indicates the disk's direction of rotation.
Make sure that the securing nut and bolt are in good
condition and if necessary, replace them.
Torque knife locknut to 7.5 daN m (55 lbf ft).
Dull knives require more horse power and have a
negative effect on the cut quality.

Disk replacement
Place a wooden wegde (2) between two disks to stop
them from moving.
Remove nut (1).
Remove the disk.
Replace knife lock-nuts and bolts when they
have been removed 5 times.
Replace immediately all worn or distorted
knives. Never straighten a bent knife.
Always replace both knives per disk.
1
2