Frontier DM1160, Руководство оператора

Страница: 46 / 68

44
Optional equipment
DM1160

Inspection of knives and securing elements
Knives
Inspect systematically all knives before the machine is
operated to:
• guarantee the cutting quality.
• guarantee safety in use.
• Prevent cutterbar damage risks.
Replace knives in the following cases:
- Damaged knives. Very rough conditions can cause
knives to crack and become deformed.
- Worn knives
Knife length C must exceed 80 mm (3.15’’).
Knife width B, measured at a distance A of 10 mm (0.4’’)
from the disk edge must exceed 20 mm (0.8’’).
The hole L for the securing bolt must not become oval by
more than 20 mm (0.8’’).
Always replace both knives per disk to avoid creating an
out-of-balance force.
Immediately replace worn or damaged parts with
original manufacturer parts.
A
B
C
L