Fronius MagicWave 1700 Job, Руководство по эксплуатации

Страница: 21 / 148

21
EN
General
Device concept
TransTig 2200 Job, MagicWave 1700 Job and
MagicWave 2200 Job with cooling unit
The MagicWave (MW)1700 / 2200 / 2500 /
3000 / 4000 / 5000 and TransTig (TT) 800 /
2200 / 2500 / 3000 / 4000 / 5000 TIG power
sources are completely digitised, micropro -
cessor controlled inverter power sources.
Their modular design and potential for sys -
tem add-ons ensure a high degree of flexi -
bility. The devices can be adapted to any
situation.
The straightforward operating concept
means that essential functions can be seen
at a glance and adjusted as required.
Job mode allows frequently used welding
data to be stored and retrieved easily.
A standardised LocalNet interface makes it
easy to connect digital system add-ons (e.g.
JobMaster TIG welding torches, robot weld -
ing torches, remote control units, etc.).
Automatic cap-shaping for AC welding with
MagicWave power sources takes the diam -
eter of the tungsten electrode into account
to help produce optimum results.
The power sources are generator-compati -
ble. They are exceptionally sturdy in day-to-
day operation thanks to the protected con -
trol elements and their powder-coated
housings.
MagicWave 3000 Job with cooling unit and
MagicWave 2500 Job
TransTig 5000 Job and MagicWave 5000 Job,
both with cooling unit and trolley
The TIG pulsed arc function, with its wide
frequency range, is available on both the
MagicWave and TransTig.
To optimise the ignition sequence in TIG AC
welding, the MagicWave takes into account
not only the diameter of the electrode, but
also its current temperature, calculated with
reference to the preceding welding time and
welding off-time.
RPI (
R
everse
P
olarity
I
gnition) ensures an
excellent ignition response during TIG DC
welding.