42
General data
Data interface
CAN
Degree of protection
IP 20
Marks of conformity
CE
Safety standard
EN 62282-5-101:2014
Dimensions l x w x h
786 x 310 x 630 mm
30.94 x 12.2 x 24.8 in.
Weight
240 kg
529.11 lb.
Permitted ambient temperature *
(at 85% relative humidity)
2 °C to 60 °C
35.6 °F to 140 °F
Permitted storage temperature
(at 85% relative humidity)
2 °C to 50 °C
35.6 °F to 122 °F
Altitude above sea level
max. 1600 m
max. 5249.34 ft.
Must be set up horizontally
*
Derating takes place in the range 40 °C to 60 °C (104 °F to 140 °F). This means that
the output power is reduced as far as necessary.
The range 40 °C to 60 °C (104 °F to 140 °F) is only permissible for short-term oper-
ation up to 30 minutes.
Connections
Tank connector and connector for equipotential bonding
via electrical connection with vehicle earth potential
OMB HFR
SAE J2600 H35
Condensate drainage connector
Detailed information can be
found in the separate document
"Refuelling regulations".
Power interface
REMA 75012-56
Warning and driver information interface
max. 30 V DC
1 A
CAN service interface
CAN 4-pin connection
High pressure equipment
Service pressure 15 °C (59 °F)
350 bar (5074.55 psi.)
Maximum filling pressure 85 °C (185 °F)
438 bar (6350.43 psi.)
Vessel capacity
27 litres (7.13 gal.)
Vessel registration
TPED/ADR 2015
Vessel standard
ISO 9809-1:2010
Vessel service life
10 years /
11250 complete filling cycles
Vessel test pressure
525 bar (7611.82 psi.)
Piping
6 x 1.5 mm (6 x .06 in.)
Pressure holding equipment
<DN25 mm (.98 in.)
