26
Start-up
Safety
WARNING!
Faulty installation can cause serious damage and injury.
Installation may only be carried out by suitable trained experts in an in-house transport ve-
hicle suitable for that purpose, in accordance with the "Proper use" section of the "Before
commissioning" chapter.
When installing the device, make sure that all material flows are unobstructed, in accord-
ance with the "Before using for the first time" section of the "Before commissioning" chap-
ter. Only operate the charger in accordance with the degree of protection shown on the
rating plate. Observe the "Operating conditions" of the "Operation" chapter.
WARNING!
Work carried out incorrectly can cause overheating and fire.
► Covers and the housing in general should only be opened or removed by the manufac-
turer's trained technicians
► Unauthorised opening or tampering with the device will invalidate the warranty and cre-
ate the risk of serious injury or damage
► Do not carry out any modifications, alterations, etc. to the device without the manufac-
turer's consent.
WARNING!
Work carried out incorrectly can cause overheating and fire.
If the device is electrically connected to the integrated back-up battery during installation,
there is a risk of serious injury and damage. Do not carry out any work on the connectors,
unless the device
► is electrically isolated from the integrated back-up battery
► is turned off and in the safe state. For detailed information about the "Safe state", refer
to the "Control panel" section of the "Control elements and connections" chapter
Advance informa-
tion
Overall vehicle safety (HyLOG Fleet, vehicle and its operation in a working area) is the re-
sponsibility of the vehicle system supplier. The vehicle system supplier must ensure that
all safety issues relating to the integration of the device into the vehicle have been clarified
with the device manufacturer.
Integration of the device into the vehicle is vehicle-specific and requires in-depth knowl-
edge of all safety issues and operation-relevant factors associated with the type of vehicle
in question. The following instructions do not therefore address the integration of the de-
vice into the vehicle, but only with the connection and actual start-up of the device.
Connecting the
power interface to
the vehicle
WARNING!
Operation with excessive power consumption can result in serious injuries and
damage.
The power consumption of the vehicle must not exceed the power delivery of the device.
