12
Protect the pressure vessel from excessive heat, mechanical impact, naked flames, sparks
and arcs.
Keep pressure vessels away from electrical circuits.
The manufacturer's instructions must be observed as well as applicable national and inter-
national regulations for pressure vessels and accessories.
Warranty and lia-
bility
The duration of the guarantee for the device depends on the supply contract. However, the
manufacturer will not accept any liability if the damage was caused by one or more of the
following:
-
Use of the charger not in accordance with the intended purpose
-
Incorrect operation
-
Operating the charger with faulty protection devices
-
Non-compliance with the operating instructions
-
Unauthorised modifications to the charger
-
Catastrophes caused by the activities of third parties and force majeure
Safety inspection
A safety inspection must be carried out by a qualified expert
-
before using for the first time after installing in the vehicle
-
after any changes are made
-
after any additional parts are installed, or after any conversions
-
after repair, care and maintenance has been carried out
-
and at least once every twelve months
The operator is required to carry out a safety inspection of the unit at least once every 12
months and to have the safety elements on the unit function-tested. Applicable national
regulations must be observed.
Maintenance, technical inspections and checks must only be carried out by qualified per-
sonnel (service organisations) who have been trained in the safety and maintenance of
these devices. In addition, all repair and maintenance work must be performed exclusively
using original replacement parts. All changes to the device and the use of parts that are
not original replacement parts may only be made with the approval of the manufacturer.
If these conditions are not met, the manufacturer cannot guarantee the safety of the de-
vice. Starting up the device without having performed safety-related maintenance work is
done at your own risk.
The manufacturer therefore accepts no liability for damage caused by inadequate mainte-
nance carried out by a third party or by the non-performance of maintenance.
Safety symbols
Devices with the CE marking satisfy the essential requirements of the applicable European
directives. Further information can be found in the "Technical data" chapter.
Disposal
Do not dispose of this device with normal domestic waste! To comply with the European
Directive on Waste Electrical and Electronic Equipment and its implementation as national
law, electrical equipment that has reached the end of its life must be collected separately
and returned to an approved recycling facility. Any device that you no longer require must
either be returned to your dealer or given to one of the approved collection and recycling
facilities in your area. Ignoring this European Directive may have potentially adverse af-
fects on the environment and your health!
