17
EN
WARNING!
Danger of serious injury and damage.
The battery must never be short-circuited, penetrated, thrown into a fire, crushed, im-
mersed in water, forcibly discharged or exposed to temperatures outside the permissible
range for the device. The battery must never be used if it is in a defective condition.
In the event that electrolyte and gases escape from the battery as a result of improper treat-
ment, you should proceed as follows:
-
If anyone breathes in the escaping gases they may experience breathing difficulties:
Immediately provide air from a fan or take the person outside for fresh air, and in more
serious cases summon medical assistance immediately
-
If electrolyte comes into contact with skin, irritations may develop:
Wash the affected area of skin thoroughly with soap and water
-
If electrolyte comes into contact with eyes, irritations of the eye may develop:
Immediately rinse the eyes thoroughly with water for 15 minutes and then call a doctor
Inadequate ventilation increases the risk of fire, explosion and suffocation. Al-
ways operate the device
-
with protective grilles fitted on the housing openings for the cooling air sup-
ply and outlet
-
with sufficient ventilation
-
in rooms with a volume of more than 10 m³ (353.15 ft³), with an air circula-
tion rate* of at least 0.6/h
-
whilst avoiding oxygen depletion of the surrounding air by ensuring ade-
quate room ventilation
Earthing symbol: A permanent potential equalization must be established be-
tween the HyLOG Fleet unit and the vehicle chassis.
Possible sources of ignition, such as fire, sparks and naked lights, must be kept
away from the HyLOG Fleet device.
Degree of protection IP20: For indoor use only. Do not expose to rain.
Do not use the functions until you have read all the Operating Instructions.
Do not dispose of used devices with domestic waste. Dispose of them according
to the safety rules.
Fire hazard! Ensure that the pressurised hydrogen container built into the device
is never exposed to high temperatures, mechanical impact, naked flames or
arcs.
There is a container of pressurised gas in the device, and it must therefore be
treated with care. Never use anything other than a damp cloth to clean the de-
vice. Ensure that the device is never exposed to damp conditions.
Pressure Vessel Production Year
* Example:
With a room volume of 10 m³ (353.15 ft³), an air circulation rate of 0.6/h
means that 6 m³ (211.89 ft³) of air are renewed per hour.