manualshive.com logo in svg

Fronius Datamanager 2.0, Руководство по эксплуатации

Поделиться
Скачать
Fronius Datamanager 2.0 Скачать руководство пользователя страница 76

"

IP address"

 field

To limit inverter control to one or more devices, enter the IP addresses of the devices
which are permitted to send commands to Fronius Datamanager in this field. Multiple
entries are separated by commas.

Examples:
-

one IP address: 

98.7.65.4

 – control only permitted by IP address 

98.7.65.4

-

several IP addresses: 

98.7.65.4,222.44.33.1

 – control only permitted by IP ad-

dresses 

98.7.65.4 and 222.44.33.1

-

IP address range, e.g., from 98.7.65.1 to 98.7.65.254 (CIDR notation): 

98.7.65.0/24

– control only permitted by IP addresses 

98.7.65.1 to 98.7.65.254

Save or Reject
Changes

Saves the changes and displays a message confirming this.

If you exit the "Modbus" section without saving your changes, all the changes you have
made will be rejected.

Prompts you to confirm whether or not you wish to reject the changes you have

made and then reinstates the most recently saved values.

76

Содержание Datamanager 2.0

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды