manualshive.com logo in svg

Fronius Datamanager 2.0, Руководство по эксплуатации

Поделиться
Скачать
Fronius Datamanager 2.0 Скачать руководство пользователя страница 11

Inverter

 

required software version according to display
(MainControl)

Fronius Agilo Outdoor
*

 

-

Fronius Agilo TL *

 

-

Fronius Galvo

 

-

Fronius Symo

 

-

Fronius Symo Hybrid

 

-

Fronius Primo

 

-

Fronius Eco

 

-

 

 

 

*

Only in conjunction with Fronius Datamanager Box 2.0

The relevant inverter software version can be downloaded for free from our homepage
(http://www.fronius.com).

If you have any questions, please contact [email protected].

Notes regarding
radio certification

The Fronius Datamanager 2.0 plug-in card and Fronius Datamanager Box 2.0 are
equipped with a wireless module.

Wireless modules in the USA require FCC certification:

FCC

This device conforms to the limit values for a Class B digital device, pur-
suant to Part 15 of the FCC regulations. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates and uses high frequency energy and, if
not used in accordance with the instructions, may interfere with radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this device does cause harmful interference to radio or television recep-
tion, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the follow-
ing measures:
-

Reorient or relocate the receiving antenna.

-

Increase the distance between the device and the receiver.

-

Connect the device to a different circuit than the receiver.

-

Consult the dealer or an experienced radio/TV technician for help.

FCC ID: PV7-WIBEAR11N-DF1

Industry Canada RSS

This device complies with Industry Canada license-exempt RSS stand-
ards. Operation is subject to the following two conditions:
(1) this device is not permitted to cause harmful interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.

IC ID: 7738A-WB11NDF1

11

EN-US

Содержание Datamanager 2.0

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды