Fronius Datamanager 2.0, Руководство по эксплуатации

Страница: 33 / 88

Inserting Fronius Datamanager 2.0 into an Inverter
General Please see the Operating Instructions for the respective inverter for information regard-
ing plug-in card installation. Please note the safety and warning information in your in-
verter's Operating Instructions.
Safety
WARNING!
Danger from grid voltage and DC voltage from solar modules.
An electric shock can be fatal.
▶
The connection area should only be opened by an authorized electrician.
▶
The separate power stage set area should only be disconnected from the connec-
tion area after first being disconnected from the grid power.
▶
The separate power stage set area should only be opened by Fronius-trained ser-
vice personnel.
▶
Before making any connections, make sure that the AC and DC sides in front of the
inverter are not charged, e.g.:
▶
Switch off the AC automatic circuit breaker for the inverter
▶
Cover solar modules
▶
Please observe the 5 safety rules.
WARNING!
Danger of residual voltage from capacitors.
An electric shock can be fatal.
▶
Wait until the capacitors have discharged.
Follow general ESD guidelines when handling plug-in cards.
Fronius Dataman-
ager 2.0 plug-in
positions The Fronius Datamanager 2.0 plug-in position is specified for each inverter type:
Inverter Plug-in position
Fronius IG 15–60
ENS slot
*)
Fronius IG 300–500
ENS slot
*)
Fronius IG Plus,
Fronius IG Plus V on the far right, unless a ML-MON plug-in card is present
Fronius CL on the far right, unless a ML-MON plug-in card is present
Fronius Galvo does not matter
Fronius Symo does not matter
Fronius Primo does not matter
*) If an ENS plug-in card is inserted in the ENS slot: insert the Fronius Dataman-
ager 2.0 in the next slot to the right of the ENS slot.
IMPORTANT!
33
EN-US