Fromm FS380 Скачать руководство пользователя страница 9

Страница: 9 / 100

Fromm

FOREWORD

1.1

HOW TO READ AND USE THE
INSTRUCTIONS MANUAL

1.1.1

THE IMPORTANCE OF THE MANUAL

1.1.2

SAFE KEEPING THE MANUAL

1.1.3

CONSULTING THE MANUAL

The instruction manual is to be considered as an integral part

of the product; keep it and look after it throughout the lifetime

of the machine and hand it on to any other users or subsequent

owners.

All the instructions contained in the manual must be followed by both

operators and qualified staff in order to correctly and safely install,

start, use and service the machine.
In the event of doubts or problems, contact the technical service

centres.

Use the manual in such a way as not to damage all or part of the

contents.

On no account should any parts of this manual be removed, torn out

or rewritten.

Keep the manual in places protected from humidity and heat.
Keep this manual and all the related publications in an accessible place

known to all the operators.

All use and maintenance operations concerning commercial machine

components that are not indicated in this manual are contained in the

relative publications attached to it.

This instruction manual is made up of:

•  COVER WITH MACHINE IDENTIFICATION
•  INSTALLATION AND ASSEMBLAGE
•  INSTRUCTIONS AND/OR NOTES ON SAFETY USE OF THE

PRODUCT

• ATTACHMENTS

Содержание FS380





































































































Результаты поиска

Содержание FS380

Отзывы:

Fromm FS380, Руководство по эксплуатации и обслуживанию, Страница: 9 / 100

Результаты поиска

Содержание FS380

Отзывы: