Fromm FS380, Руководство по эксплуатации и обслуживанию, Страница: 34 / 100

28
Rev.2 01/03/2021
Use and Maintenance Manual | TURNTABLE - MAST
28
3.3 ROLL-HOLDER CARRIAGE
FM (MB) carriage
3
6
2
5
A
1
4
A
4
A
Clockwise plate rotation Anti-clockwise plate
rotation
»
See Picture 16 - pag. 28
With this carriage version, the application tension of the film on the
pallet can be adjusted.
The carriage
FM (MB) is composed of a rubber-coated roller (1) and a
roller (2) with mechanical brake.
The knob (3) is used to adjust the action of the brake and, consequently,
the tension of the film.
Upon starting, the film must be loaded onto the carriage:
• Put the carriage into the Down position to make fitting the roll
easier.
• Turn the main switch to the ‘O’-OFF position .
• Push the roll (4) onto the centre pin (5) .
• Insert the film between the rollers following the path indicated
in figure (A) , the symbol with the triangles identifies the side of
the film to which the bonding agent (if present) is applied.
• Diagram (A) is also attached to the carriage.
• Tightening the knob (3) increases the tension of the film,
loosening decreases it. Once the proper adjustment has been
found, the position of the knob (3) is set by tightening the lock
nut (6) .
Picture 16