manualshive.com logo in svg

Fromm FS380, Руководство по эксплуатации и обслуживанию, Страница: 58 / 100

Поделиться
Скачать
Fromm FS380 Скачать руководство пользователя страница 58

52

Rev.2  01/03/2021

Use and Maintenance Manual | TURNTABLE - MAST

52

3.7 

WORK AND CONTROL STATIONS

 

»

 See Picture 32 - pag. 53

STATION A 

- Control area

The operator must be at this station when the machine is carrying out 

a wrapping cycle. 

It is the station from where the operator starts and stops the machine 

and  changes  the  machine  working  modes.  It  also  allows  visual 

surveillance of the work cycle, so that the operator can activate the 

emergency stop device in the event of potentially dangerous situations.

STATION B

 - Work area

In the work area the operator carries out the following operations:

• 

attaches the film to a corner of the pallet to start the work cycle;

• 

cuts the film at the end of the work cycle.

DANGER

Attaching  and  cutting  the  film  must  be  done  with  the  machine 

cycle stopped and the turntable not moving.

STATION C

 - maintenance area

In  the  maintenance  area  the  operator  carries  out  the  following 

operations:

• 

changes the film roll;

• 

adjusts the film tension, if mounted on the carriage.

WARNING

All operations that can be performed in station “C” must be carried 

out with the turntable fully down and the machine stopped.

DANGER

IT IS FORBIDDEN TO CROSS THE CENTRAL MACHINE AREA MARKED 

AS “D”.

Содержание FS380





































































































Отзывы:

Нет отзывов