Fromm FS380 Скачать руководство пользователя страница 29

Страница: 29 / 100

Fromm

MACHINE DESCRIPTION

3.2.2

TABLE OPTIONAL EQUIPMENT

3.2.2.1

DOOR WINDOW APPLICATION

This optional device is for packaging doors, shutters, windows, all thin

objects and those with low weight, manually loading the product in the

containment grippers.

Version with grippers on the plate

Manually position the product to be wrapped above the profile located

on the turntable

(1)

, after setting the width of the product to be

wrapped, moving the grippers

(2)

using the levers

(3)

. The operator

must keep the product still and press the pedal

(4)

to lower the upper

grippers

(5)

and lock the product in place. Attach the stretch film and

start the wrapping cycle.

At the end of the cycle, the machine stops, maintaining the presser with

the upper grippers

(5)

in position. The operator must cut the stretch

film, hold the wrapped product, press the pedal

(4)

to lift the upper

grippers

(5)

and remove the wrapped product.

Picture 12

Содержание FS380





































































































Результаты поиска

Содержание FS380

Отзывы:

Fromm FS380, Руководство по эксплуатации и обслуживанию, Страница: 29 / 100

Результаты поиска

Содержание FS380

Отзывы: