Fromm FS380 Скачать руководство пользователя страница 66

Страница: 66 / 100

Rev.2 01/03/2021

Use and Maintenance Manual | TURNTABLE - MAST

INSTALLATION

5.1

PERMITTED AMBIENT CONDITIONS

Temperature:

For regular operation of the machine, the ambient temperature must

be b5°C and +40°C.

Atmospheric conditions:

The electrical equipment is able to function correctly in atmospheric

conditions with relative humidity not greater than 50% at a temperature

of 40°C and 90% at a temperature not over 20°C (without condensation).

If the atmospheric conditions are not suitable for machine operation,

the Manufaturer can, on request, provide solutions to remedy the

problem (e.g. air conditioners, thermostatic heating elements, etc.).

Altitude:

Useful altitude not exceeding 1000 meters above sea level.

Lighting:

Minimum necessary and indispensable illumination: 300-500 lux.

DANGER

The standard machine is not designed or set up for operation in

places with an explosive atmosphere or risk of fire.

Содержание FS380





































































































Результаты поиска

Содержание FS380

Отзывы:

Fromm FS380, Руководство по эксплуатации и обслуживанию, Страница: 66 / 100

Результаты поиска

Содержание FS380

Отзывы: