Operating the System
Heating up the boiler
Page 12
a
B 003 04 05
a
3
3.2
Heating up the boiler
3.2.1
Switching on the system
U
Switch on the main switch
9
at the control system
´
After the system check, the control system is ready
for operation
3.2.2
Switching on the boiler
Lambdatronic S3100
U
Set the INDUCED DRAUGHT FAN selector switch
7.4
or
8.1
to “OFF”
U
Press the START key
7.7
or
8.6
Digitronic S3100
3.2.3
Load the boiler with fuel and fire it up
U
Open the insulating door and the fuel loading door
U
Fill the fuel loading chamber in accordance with the
output
Use firewood with a length of approximately 50 cm and
arrange it lengthwise
The flame slot must not be obscured!
U
Close the fuel loading door
U
It is recommended that you do not remove the ash on the
combustion chamber during each heating-up process, to
protect the combustion chamber.
À
See page 15, Removing the ash
U
Open the central pre-heating chamber door
U
Place some cardboard and crumpled paper under the
wood
9
8.1
8.6
7.7
7.4
