Frigomat T Series, Руководство по использованию и обслуживанию

Страница: 40 / 151

ENGLISH - 14
5.3.1 GELATO PRODUCTION WITH CONSISTENCY CONTROL
-
By pressing the SEMI-AUTOMATIC
PRODUCTION pushbutton, the display lightens
indicating the last consistency setting.
Pushbuttons UP – ENTER – DOWN lighten as
well. Now the machine is ready to enter a new
gelato consistency setting.
If after 5 seconds no pushbutton is pressed, the
machine will automatically start according to the
last consistency set displayed.
- Increase and decrease the consistency value
displayed by means of the UP and DOWN
pushbuttons. Once obtained the desired value
push ENTER to save the data. The freezing cycle
starts.
The max. possible value is 250, but not all mixes
are suitable to achieve this consistency value.
- After a few minutes, once the required
consistency has been achieved, the compressor
stops, the PRODUCTION pushbutton blinks and
an intermittent beep is release to warn the
operator that the ice-cream can be drawn out. If
this is not possible, the agitator keeps on rotating
until the consistency level falls by a
predetermined percentage value and the ice-
cream PRESERVATION phase begins, which can
be stopped at any time with the delivery of the
ice-cream.
- Press DELIVERY pushbutton to draw the ice-
cream out and completely open the delivery door
by means of the apposite lever.