background image

29

Freezer Features 

(varies by model)

Basket

Retainer

Removing Lower Basket

To Remove Lower Basket

  1  Remove all items from basket.
  2  Remove the basket by tilting it forward 

and lifting it from the retainer clips.

NOTE

If basket is not resting on stabilizer bar 

retainer clips, the drawer will not close 

properly.

Two Freezer Baskets

Stabilizer Bar

Basket

Retainer

Clips

To Remove Upper Basket

 1 Remove 

all items 

from 

basket.

 2 Remove 

basket by 

pulling 

baskets 

out to 

their full 

extension 

and lift 

out.

To reinstall upper basket, position basket onto 

the retainer clips making sure the front of 

the basket rests in the retainer clips on the 

stabilizer bar.

Removing Upper Basket

To reinstall lower basket, insert basket into 

retainer clips.

Dairy compartment

Use the dairy 

compartment, 

at the top of 

the fresh food 

compartment 

door, for 

short-term 

storage of 

cheese, 

spreads, 

or butter. 

The dairy 

compartment 

is designed to be warmer than the open area 

and includes a lift-up cover and a dairy divider 

(select models).

Dairy Compartment

STORAGE FEATURES

Содержание FFH17F7HWC













































Отзывы: