Frigidaire FFH17F7HWC Скачать руководство пользователя

Страница: 27 / 44

CAUTION

To avoid personal injury or property

damage, handle tempered glass shelves

carefully. Shelves may break suddenly if

nicked, scratched, or exposed to sudden

temperature change. Allow the glass shelves

to stabilize to room temperature before

cleaning. Do not wash in dishwasher.

STORAGE FEATURES



NOTE

Features may vary according to model.

Your refrigerator includes

SpillSafe

glass

shelves that are designed to catch and hold

accidental spills.
You can easily adjust shelf positions in the

fresh food compartments to suit your needs.

The shelves have mounting brackets that

attach to slotted supports at the rear of each

compartment.

To change the position of a shelf:

1 Remove all food from shelf.
2 Lift the front edge up and pull the shelf

out.

3 Replace by inserting the mounting bracket

hooks into the desired support slots.

4 Lower the shelf and lock into position.

Shelf features

Drawers

Your refrigerator includes a variety of storage

drawers. These drawers are located in fixed

positions at the bottom of the fresh food

compartment.

Crispers

Crisper drawers are designed for storing fruits,

vegetables, and other fresh produce.

Crisper humidity control

Crisper drawers include a sliding control for

adjusting the humidity inside the crisper. Leafy

vegetables keep best when stored with the

Humidity Control set on Higher Humidity. Fresh

fruits keep best when stored with the Humidity

Control set on Lower Humidity.

To remove the Crisper Drawer for

cleaning:

1 Pull the drawer out until it stops.

Flip Shelf

Opening Crisper Drawer

Adjusting Crisper Humidity

Vegetables

Fruits

Humidity Control

Higher

Humidity

Lower

Humidity

Slide-Under Shelf

Содержание FFH17F7HWC













































Результаты поиска

Содержание FFH17F7HWC

Отзывы:

Похожие инструкции для FFH17F7HWC

Бренды по названию

Популярные бренды

Frigidaire FFH17F7HWC, Инструкция по использованию и уходу

Результаты поиска

Содержание FFH17F7HWC

Отзывы:

Похожие инструкции для FFH17F7HWC

Бренды по названию

Популярные бренды