Page 4
Tiles
™
Installation Manual
Tile Assembly, Frames, Connectors, and Change
of Height Wedge Installation
Notched Tab
Notched Tab
Draw Rod
Draw Rod
Post
Cap Screw
Cap Screw
Frame
Frame
Frames of Equal Heights
1. Connect Draw Rod to the first frame by
inserting the bottom hook on Draw Rod
into rectangular opening at the bottom
of the frame. Loosen Cap Screw, so it
lines up with Notched Tab at the top of
the Frame.
2. Lift second Frame to engage bottom
hook on the Draw Rod to the rectangular
opening at the bottom of the second
Frame.
3. Position Frames so that notched Tab
on one is fitted between shoulders of
adjacent Cap Screw of Draw Rod.
NOTE: Be sure that the Glides are all the
way in at the bottom of the Frame. If floor
is very uneven, Glide adjustment should
be made during assembly of product.
4. Tighten Cap Screw until stiles come
together.
Frame to Connector of Equal Height
1. To connect a Frame to a Connector of
equal height, you need a Draw Rod of
the same height.
2. Connect Draw Rod to the Connector by
inserting the bottom hook on Draw Rod
into rectangular opening at the bottom of
of the Connector. Loosen Cap Screw, so
it lines up with the Notched Tab at the
top of the Connector.
3. Position Frame so that notched Tab on
the Frame is fitted between shoulders of
adjacent Cap Screw of Draw Rod. Hold
Frame against Connector and tighten
Cap Screw until Frame and Connector
come together.