Page 23
Tiles
™
Installation Manual
Door Frame Installation
Page 23
NOTE: Door swing cannot be changed.
If opposite swing configuration is needed,
a new door is required.
1. Door Frame is factory assembled for
either left or right hand swing.
2. Place Door Frame at the proper location
with door swing on the desired side of
Frame.
3. Connect Door Frame to adjacent Frame
with Draw Rod.
4. Adjust adjacent Frame Glides so door
opening is square with the door. Door
Frame must be parallel to the flat face of
the door.
5. Loosen bottom screws on each side of
opening above Threshold. Press Thresh-
old to floor and tighten screws.
6. Position Trim Strips and press in place.
Top Jam
Threshold
Threshold
Screw
Trim Strips