Page 12
Tiles
™
Installation Manual
WARNING:
Disconnect power before servicing.
WARNING:
All electrical connections must be fully
engaged and locked. A loose connection
can cause fire and/or electrical shock.
Beltline Power Transfer
This Power Transfer is used to extend power
through a 3- or 4-Way Connector at Belt Line
level. It connects to the Beltline Power Retro
on either side of the connector and takes the
place of the Festoon.
1. To install the Flex Conduit, connect
Beltline Power Transfer Jumper to the
Beltline Power Retro on one Frame. Let
Flex Conduit drop down below the Con-
nector Post, and back up on the other
side of the Connector Post. Bring Flex
Conduit back up to the Power Retro on
the other side of the Connector Post.
2. Secure bottom of Flex Conduit to Frame
with plastic Tie Strip provided.
3. Make sure that both connections are
fully engaged, and the spring tabs click
into position.
8-Wire Electrical, Beltline Power Transfer Installation