manualshive.com logo in svg

Fri-Jado Cold MCC, Руководство по обслуживанию

Поделиться
Скачать
Fri-Jado Cold MCC Скачать руководство пользователя страница 8

Page 8 

Rev 3 Service Manual MCC Hot / Cold  2021

2.0

 Detailed description 

2.1  Technical description Self Serve

 

Panels are made of galvanized steel plating, stainless steel and/or aluminum.  

 

Some of the visible internal and external parts have been provided with a powder coating.  

 

Glass used is tempered.  

 

Unit can be moved by means of a pallet truck.  

  

 

Product contact parts are made of stainless steel AISI 304 or AISI 430 and tempered glass. 

2.2  Cold units Self Serve: 

(OmiCold Air flow technology)

 

Cooling is achieved by means of a thermostatic temperature-controlled cold airflow.  

 

Cold air is passed via the back and shelves over the products.  

 

 

Between price rail and child glass an opening exists which is vital for the airflow 

 

 

inside the unit.

 

 

Price rail must always be kept in place . 

  

 

 

For MCC Cold SS: 

 

 

Price rail is integrated part of air guidance inside the unit. 

  

Removing the price rail will result in a bad functioning MCC

 

Self-serve models have an additional set of fans mounted in the top to create a stable air curtain on  

 

the open side of the cabinet to minimize the infiltration of warm ambient air. The air on the front side  

 

passes through the suction grid in the bottom of the unit.

 

Temperature of the airflow is controlled electronically.  

 

The electronically controlled thermostat is factory pre-programmed.  

 

Set temperature can be changed from -6 ºC to +0 ºC (21.2 ºF to 32 ºF). 

 

 

The units can be connected to a fixed drainage system or an optional evaporation tray to evacuate 

 

Condensation water.  

 

 

One LED-module per level provides lighting of the products.  

 

Lighting and cooling are switched on simultaneously 

 

Self-serve models can be fitted with an optional night curtain.

 

Air flow Self Serve    

 

 

 

 

Air flow Full Serve

 

 

Содержание Cold MCC




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды