manualshive.com logo in svg

Fri-Jado Cold MCC, Руководство по обслуживанию

Поделиться
Скачать
Fri-Jado Cold MCC Скачать руководство пользователя страница 14

Page 14 

Rev 3 Service Manual MCC Hot / Cold  2021

 

Put the thick or thin plastic washer 

 

(depending on leveling) on the bottom hinge  

 

pin of the door. Do this at all doors.

 

Place the hinge pin with the nylon washer    

 

on in the bottom hole (A). Keep the door in a  

 

tilted position during this action.

 

 

Press the hinge pin at the upper side  

 

downwards. Turn the door in a ´vertical´ 

 

position so the upper hinge pin will align with  

 

the upper hole. Release the hinge pin into    

 

the upper hole (B). 

 

Be sure inside the hole a nylon bearing is    

 

placed, in the bottom holes as well as in the   

 

top holes.

 

 

If both hinge pins are correctly clicked  into 

 

the bottom and upper hole, the door is 

 

mounted correctly.  

Содержание Cold MCC




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды