manualshive.com logo in svg

Fri-Jado Cold MCC, Руководство по обслуживанию

Поделиться
Скачать
Fri-Jado Cold MCC Скачать руководство пользователя страница 12

Page 12 

Rev 3 Service Manual MCC Hot / Cold  2021

3.0

 Unpacking

3.0  Start to unpack

  

 

All packing materials used for this unit are suited for recycling.

 

 

Before and during unpacking, check the state of the unit. In case of damage, photograph  

 

 

the damage, store the packing material, and contact the transporter as soon as possible but  

 

 

at the latest within fifteen working days after receiving the goods.

3.1  Unpacking the unit

 

The MCC is placed inside a crate during transport, take the following steps to unpack.

 

 

1. 

Remove the top crate pane and foam.

 

 

2. 

Remove the front and rear boards.

 

 

3. 

Remove both side boards.

 

 

4. 

Lift the unit from the support beams using a pallet truck or forklift.

 

 

5. 

Remove the supporting beams.

 

 

6. 

Observe the safety and warning signs.

 

       

           

  

 

 

Содержание Cold MCC




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды