Fri-Jado BS10i, Руководство по обслуживанию

Страница: 21 / 88

SERVICE PROCEDURES
Page 21 Page 21
Service Manual Bake Star intelligent
PKII
form 9123665 rev. 06/2013
construction beam
Oven back wall
MOUNTING OF THE FANS
The fan motor is mounted with 4 screws
M4 on the back.
Important here is that the screw depth
into the motor is not more than 5 mm!!
The turbine is mounted with one bolt
M5 and a lock washer.
Sometimes, shims are used
for the right adjustment of
the motor.
Therefore the screw lenght
for the mounting of the
motor can differ!!
See Caliper measurement for the right
adjustment.
Basicly, the adjustment will be ok from
factory. Therefore it is important, not
to throw away the shims with an old
motor.
-->The screws will go deeper in the mo-
tor, causing short circuit.
-->Also the shaft seal can get blocked,
causing the blower to stop.
3-3,5mm
Max screw
depth = 5mm !!