Fri-Jado BS10i, Руководство по обслуживанию

Страница: 8 / 88

Page 8
Service Manual Bake Star intelligent
PKII
form 9123665 rev. 06/2013
PROGRAMMING INSTRUCTIONS
THE I-CONTROL MENU’S
OVERVIEW OF THE CONTROL PANEL
This controller has menu’s for:
• The operator. see tab “operate”.
• The store (department) manager. see tab “program”.
• The service engineer. see tab “settings”.
See overview of choices in the menu’s below.
Operate Program (for manager) Settings (manager and service)
Program 1 Add program Information --> shows software version and last error
Program 3 Edit program Manager --> Manager settings, including password
Program ..... Delete program Service --> Service settings and I/O test screens
Test program
Timer:
Cleaning
Manual
The operator has the following possibilities:
• Running cooking programs or the cleaning program.
• Setting the timer to auto start the unit. (Only if the manager parameter “Auto recipe
start” is enabled.)
• Use of the manual program. (Only if the service parameter “manual operation” is enab-
led.)
The manager controls the “program” menu and the manager settings in the settings menu.
In case the manager decided to activate the manager password, the operator does not
have access to the program tab and the manager parameters under the settings tab.
The service engineer has access to all menu’s. The password for the service settings is 4878.
In case the manager has set a manager password, this will be shown in one of the service
settings.
Choosing and run-
ning programs
Programming
cooking programs
-Information
-Parameter settings
-I/O test
Start / pause of
program
Switching ON
Press for 3 seconds
-Press 6 seconds
for key test.
Combination of dial and
up - down - left - right keys
Stop / cancel
of program
-Rotor key for positioning
rotor
-Door open key in BSi
Confirmation or ente-
ring of choice.
Switching OFF
Press both keys for
3 seconds.
Refer to the service manual “I-control”!