Fri-Jado BS10i, Руководство по обслуживанию

Страница: 11 / 88

PROGRAMMING INSTRUCTIONS
Page 11 Page 11
Service Manual Bake Star intelligent
PKII
form 9123665 rev. 06/2013
Method of working:
1. Select a cell to edit with the arrow keys. The cell will turn .
2. Activate the cell with <OK>. The cell will turn .
3. Edit the cell with the dial, or up and down keys. --> xxx
4. Confirm with <OK>. --> xxx
5. Select the next cell. -->
6. Finish programming when all necessary cells are edited, by using the <down> key towards
“save program”.
7. Push <OK> to leave the screen.
Additional information about the cooking parameters:
Time.
In the first line (step), time is adjustable from 1 untill 240 minutes and it has also a preheat
possibility. “PRE” is shown in that case.
In the second step, there is also a possibility to put the time on “HOLD”. The program will
run untill the <Stop> key is being pushed.
PROGRAMMING (ADDING OR EDITING A PROGRAM)
Press <program>.
Select “add program” or “edit program” with the dial.
Confirm with <OK>
Make a name.
Select a character with the dial.
Next character with arrow or OK.
Finally confirm with <OK> twice.
In case of editing, just repeat <OK>.
The following screen will appear.
The screen shows a diagram with 9 lines. These are
the 9 possible cooking steps of which a cooking
proces can consists of.
The top line will be the first cooking step, or it can
be the preheat fase (advised).
The 6 columns represent respectively the time, tem-
perature, fan speed, steam mode, steam quantity
and vent position (open or closed).