freightliner PX113064S T 2016, Руководство пользователя

Страница: 53 / 236

When a turn signal is activated, the directionally
equivalent turn signal telltale light flashes on the
instrument panel.
The lever is self-canceling, meaning it automatically
returns to the neutral position when the steering
wheel returns to the straight-ahead position after a
turn.
The lever is also a combination turn-signal,
windshield wiper/washer switch, and high beam
headlight control unit. See
Fig. 4.6 .
Backup Lights
Backup lights activate only when the vehicle is in
reverse, and are designed to be used when backing
up in low light conditions.
Hazard Warning Lights
The hazard warning light switch is located on the
dash switch panel. See
Fig. 4.8 . The hazard lights
can be activated regardless of the keyswitch position.
To activate the hazard lights, press the center of the
switch once.
All the turn signals on the vehicle and trailer, as well
as the turn signal indicators in the ICU, flash
simultaneously when the hazard lamps are activated.
The switch will blink at the same rate that the hazard
lamps flash.
Press the hazard warning light switch again to turn
the lamps off.
Marker Lamps
To turn the marker lamps on, turn the headlight
switch clockwise past the off position. See
Fig. 4.5 .
Marker Interrupt Switch
A marker interrupt switch is located in the left-hand
switch pod of the steering wheel. See
Fig. 4.9 .
Pressing it temporarily flashes the marker lamps.
f611826 05/19/2020
DRL
OFF
Fig. 4.7, Daytime Running Lights Override Dash Switch
f547634 09/27/2021
1
2
1. Hazard Warning Lights Switch
2. eStop Button
Fig. 4.8, Hazard Warning Dash Switch
f612076a 05/03/2022
1
2
3
4
5
6
A
A. Menu Button—Press to access display menus. Use
a finger to swipe left or right to move between
screens
1. Cruise Accelerate/Resume
2. Back Button
3. Quick Access System Settings
4. Marker Interrupt
5. Cancel Cruise Control
6. Cruise Decelerate/Set
Fig. 4.9, Steering-Wheel-Mounted Left-Hand Pod - ICC5
Driver Controls
4.4