freightliner PX113064S T 2016, Руководство пользователя

Страница: 210 / 236

9. Use mid-rise or high-rise forks, or lift adaptors
(part number 0200020) on the crossbar to
provide clearance for the aerodynamic bumper.
See
Fig. 19.10 and Fig. 19.11 .
10. Extend the stinger and place the lift adaptors
under the axle. Make certain the lift adaptors are
under the front suspension springs between the
U-bolts. See
Fig. 19.12 and Fig. 19.13 .
WARNING
Failure to protect high-voltage (HV) cables from
towing chains could cause property damage,
severe personal injury, or death.
11. Secure the vehicle axle to the tow truck crossbar
with a chain or ratchet strap.
12. Remove the tow cables from the tow loops and
retract the recovery boom. See Fig. 19.14 .
13. Remove the tow loops from the bumper.
14. Connect the air and electrical supply lines from
the tow truck to the truck being towed.
IMPORTANT: On trucks equipped with a front
air suspension, either air pressure must be
supplied to the secondary air system or the front
f130152 06/14/2017
Fig. 19.10, Lift Adaptors Installed on the Crossbar
f130153 06/14/2017
Fig. 19.11, Backing the Tow Truck with Lift Adaptors on
the Crossbar
f130154 06/14/2017
Fig. 19.12, Positioning the Stinger with Lift Adaptors
Under the Axle
f130155 06/14/2017
Fig. 19.13, Stinger with Lift Adaptors Under the Axle
(tow truck shown)
f130156 06/07/2022
Fig. 19.14, Retracting the Recovery Boom
In An Emergency
19.7