FREEWAY Height Adjustable Shower Trolley with Liner 1500mm, Руководство пользователя

Страница: 10 / 28

999076 – Revision A P a g e | 10 of 28
3.3 Shower Trolley Assembly
3.3.1 Liner and Drainage Pipe
The Shower Trolley should be fully unpackaged prior to assembly.
A. Place the Liner onto the Support Frame of the Shower Trolley with
the plug hole marrying up with the Support Frame hole. (Figure 4)
B. Position the Large Plastic Spacer as shown in figure 5. Ensure the
face with the cut out is facing upward, against the support frame.
C. Position the black rubber spacer directly below the plastic large plastic spacer.
D. Attach the threaded Pipe fixing by rotating anticlockwise until it is secure and
tight. (See Figure 6)
Ensure the threaded pipe fixing is secured tight to avoid inadvertent
detachment.
E.
Attach the pipe by rotating the thread anticlockwise until it is secure, use the
plastic grip attachment to fully secure the attachment. (Figure 7)
F.
Fit the Plug once the pipe assembly is complete. (Figure 8)
Ensure the pipe is secured tight to avoid inadvertent detachment or water
leakage during operation.
NOTE: To disassemble the Shower Trolley Drainage Pipe and Liner, simply follow the
pervious steps in reverse.
Ensure the Shower Trolley Drainage Pipe is securely attached to the Support
Frame/Liner.
Ensure that the Plug is fitted into the drain hole once the assembly is complete.
Figure 4
Figure 6
Figure 5
Figure 7
Figure 8