Set Up with HyperTerminal (cont.)
IO Slave
(3) Radio Transmission Characteristics (cont.)
(4) RF Data Rate–
The RF Data Rate must be set to 3 when using the FGRIO System. This
is for applications that are stand alone or when integrated into an existing FGR network.
(8) Retry Timeout–
By lowering the Retry Timeout, the inactive link time between the
FGRIO Master and IO Slave can be reduced when going from autonomous mode to
connecting back to the FGR Network. If the Network Master goes down, the FGRIO
Master and Slave will continue to operate in autonomous mode. When the Network
Master comes back up, the FGRIO Master will break the link with the IO Slave to
reestablish a link with the Network Master. Once the FGRIO Master is linked to the
Network Master, then the IO Slave will be able to link back to the FGRIO Master.
With a lower Retry Timeout setting, it will take less time for the IO Slave to link to
the FGRIO Maser.
(5) MultiPoint Parameters-
(0) Number Repeaters-
This setting must be set to 1 for all FGR and IO radios in the
Network.
(6) Network ID–
In addition to entering the FGRIO Master’s serial number in the Call
Book, the Network ID being used for the Network must be set from 1-4095 (Do NOT use
255). Use the same Network ID for the IO Slave as was used for the FGRIO Master.
Programming both the Call Book and Network ID settings is unique to the FGRIO
System and must be done for both integrated and stand alone applications.
Combined Packet Size Definition with RF Date Rate of 3
Max Setting
Min Setting
0
1
2
3
4
5
6
7
8
9
0
8
24
40
56
72
88
104
120
136
152
1
12
28
44
60
76
92
108
124
140
156
2
16
32
48
64
80
96
112
128
144
160
3
20
36
52
68
84
100
116
132
148
164
4
24
40
56
72
88
104
120
136
152
168
5
28
44
60
76
92
108
124
140
156
172
6
32
48
64
80
96
112
128
144
160
176
7
36
52
68
84
100
116
132
148
164
180
8
40
56
72
88
104
120
136
152
168
184
9
44
60
76
92
108
124
140
156
172
188
Fig. 11
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-20028-FreeWave-FGR2-IO-IOE-Radio-Enclosed-900-MHz-I/O-Slave-Radio.aspx
