manualshive.com logo in svg

Freetech P6F94, Быстрая справка

Поделиться
Скачать
Freetech P6F94 Скачать руководство пользователя страница 60

Execute the BMIDE_95.EXE to extract files for driver and installation 
instructions for Windows 95. Execute the BMIDE_NT.EXE to extract 
files for driver and installation instructions for Windows NT. Execute 
the BMIDEOS2.EXE to extract files for driver and installation 
instructions for OS/2.

4.4 PIIX4(E) Utility for Windows 95

The PIIX4(E) utility is a an upgrade utility that can be employed under 
Win95 to automatically upgrade your current IDE controller support to 
PIIX4. For example, while install a Windows95 from PIIX4 platform, 

Under Win95, My computer, control Panel, Device Manager. View 
device by Type 
Other Device! PCI Bridge,! PCI Universal Serial BUS.

To let Win95 properly report your device resource, follow below 
instructions:
     Implement WINP2X4 
     Under Win95 DOS prompt, type WINP2X4 
     After issuing this command, a display similar to this appear: 

     WinP2X4.EXE V1.xx
     Copyright(c) Award Software, inc. 1997 All rights Reserved
     === Microsoft Windows 95 implement for Intel PIIX4 ===
     The Windows 95 directory is C:/WINDOWS (Y/N)?

Respond “Y” if windows 95 directory is correct. If the Windows 95 
directory is other than the default directory, please respond “N”, and 
follow the on-screen prompt to enter the correct path.

     Please input directory name of your Windows 95 system: XXXX
     **** Modifying your Windows 95 system.....success
     You have to restart the Windows95 system right now.

Follow the on-screen prompt to restart your system to let the change 
take effect. You may be prompted to update device drivers after 
system restart.

Note: The device driver ideatapi.mpd is locate at 
C:\windows\system\iosubsys directory.

Chapter 4: Driver and Utility 

60                                                                 P6F94 User’s Manual 

Содержание P6F94

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды