5. Slide the clips on the supports (D) forward until they click into places
to hold the pegs securely. (Apply slight pressure on the peg and push
the peg toward the clip while pushing the clip forward.) Push the
latches on the processor (E) outward until they click into place in the
retention mechanism. The latches must be secured for proper electri-
cal connection of the processor.
6. Attach the small end of the power cable (F) to the three-pin
connector on the processor, then attach the large end to the three-pin
connector on the motherboard, which is marked FAN1.
28 P6F94 User’s Manual
Chapter 2:Hardware Installation
