Follow these three steps to setup CPU speed.
1) Turn the system on, then press <DEL> key to access the
AWARD BIOS SETUP program. A “CMOS SETUP UTILITY” will
display on the screen. At “CMOS SETUP UTILITY” screen
selects “Chipset Features Setup” and press <Enter>.
2) On the top right hand side of the “Chipset Feature Setup”
screen, there is a “CPU Speed” option. Refer to the table below
and select the correct CPU speed.
P6F94 User’s Manual 33
Chapter 2:Hardware Installation
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD SETUP DEFAULTS
SUPERVISOR PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
Esc: Quit
F10: Save & Exit Setup
: Select Item
<Shift>F2
ROM PCI/ISA BIOS (2A69JF2M)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
USER PASSWORD
INTEGRATED PERIPHERALS
BIOS FEATURES SETUP
STANDARD CMOS SETUP
: Change Color
CHIPSET FEATURES SETUP
E
ROM PCI/ISA BIOS (2A69JF2M)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Auto Configuration
DRAM Speed Selection
MA Wait State
EDO RAS# to CAS# delay
CPU Speed
: Enabled
: 60 ns
: Fast
: 3
: 266MHz(66x4.0
)
: Enabled
Video BIOS Cacheable
(Shift) F2: Color
PU/PD/+/-:Modify
ESC: Quit
F1: Help
F5: Old Values
F7: Load Setup Defaults
:Select Item
Video RAM Cacheable
: Disabled
Memory Hole At 15M-16M : Disabled
AGP Aperture Size (MB)
Current System Temp.
Current CPU FAN Speed
Vcc3
+ 12V
- 5V
Vccp
+5V
: +3.32
: +12.01
: -4.98 - 12V
: +2.80
: +5.01
: -11.96
: 64
: 4383
16 Bit I/O Recovery Time
Passive Release
: Enabled
: 1
Auto Detect DIMM/PCI Clk : Enabled
Current FAN2 Speed
: 48
0
C/120
0
F
: 4353
Spread Spectrum Modulated : Enabled
System BIOS Cacheable
8 Bit I/O Recovery Time
Delayed Transaction
: Enabled
: 1
: Disabled
CPU Ratio
CPU Frequency
: x 4.0
: 66MHz
EDO RAS# Precharge Time
EDO DRAM Read Burst
EDO DRAM Write Burst
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time
SDRAM CAS Latency Time
DRAM Data Integrity Mode
: 4
: x222
: x222
: Slow
: Slow
: 3
: Non-ECC
CPU Warning Temperature
:
66
0
C/151
0
F
E
