Press the <ESC> key to go back to the main program screen,
after you have made your selections in the POWER
MANAGEMENT SETUP.
3.11 PnP / PCI CONFIGURATION
Both the ISA and PCI buses on the Mainboard use system IRQs &
DMAs. You must set up the IRQ and DMA assignments correctly
thru the PnP/PCI Configuration Setup utility, otherwise the Main-
board will not work properly.
Selecting “PnP / PCI CONFIGURATION” on the main program
screen displays this menu:
PnP / PCI Configuration
PnP OS Installed: Setting this option to “Yes” allows the PnP OS,
instead of BIOS to assign the system resources such as IRQ and I/O
address to the ISA PnP device. The default setting is “No”
Chapter 3: BIOS Configuration
P6F94 User’s Manual 51
(Shift) F2: Color
PU/PD/+/-:Modify
ESC: Quit
F1: Help
F5: Old Values
F7: Load Setup Defaults
:Select Item
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-14 assigned to
: Disabled
: PCI / ISA PnP
: PCI / ISA PnP
Resources Controlled By
: Manual
ROM PCI/ISA BIOS (2A69JF2M)
PNP / PCI CONFIGURATION
AWARD SOFTWARE, INC.
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-9 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-12 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
: PCI / ISA PnP
: Legacy ISA
: PCI / ISA PnP
: PCI / ISA PnP
: PCI / ISA PnP
: PCI / ISA PnP
: Legacy ISA
: Legacy ISA
: PCI / ISA PnP
: PCI / ISA PnP
: PCI / ISA PnP
: PCI / ISA PnP
: PCI / ISA PnP
: PCI / ISA PnP
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
: PCI - AUTO
: A
: B
PNP OS Installed
: No
: N/A
Used MEM base addr.
Assign IRQ For USB
: Enabled
