Freemotion FMTK74810.0, Руководство пользователя

Страница: 10 / 44

10
6. Set the console assembly on the Upright (93). Be care-
ful not to pinch any wires. Make sure that the ends of
the Console Crossbar (110) are inserted into the ends of
the Uprights.
Start two 3/8" x 2 1/2" Bolts (61) with two 3/8" Flat
Washers (78) and two 3/8" x 2 1/2" Bolts with four 3/8"
Star Washers (66) and two 3/8" Locknuts (87) as shown.
Do not fully tighten the Bolts yet.
93
61
61
66
66
87
87
61
61
78
110 110
78
6
Console
Assembly
7. Start four 5/16" x 1" Screws (51) into the Upright (93)
and Console Crossbar (110); start all four Screws, and
then tighten them.
Tighten four #8 x 3/4" Screws (86) into the Upright (93)
and the console assembly.
Tighten the four 3/8" x 2 1/2" Bolts (61). Make sure
the four #8 x 1" Screws (91) are tightened. Be careful
not to over tighten the Screws.
51
93
86
86
61
61
110
91 91
103
7
51
8. Tighten two #8 x 3/4" Screws (86) into the Console Base
(109) and the Upright (93). Do not overtighten the
Screws.
Identify the Left and Right Handrail Assemblies (112,
113). Hold the Right Handrail Assembly (113) near the
Upright (93). Insert the wire from the Right Handrail
through the hole in the Console Base (109) and out the
top of the Upright.
Apply three drops of the included thread adhesive to the
threaded ends of two 3/8" x 5 1/2" Screws (50). Then,
attach the Right Handrail Assembly (113) to the Upright
with the two 3/8" x 5 1/2" Screws (50) and two 3/8”
Washers (134). Start both Screws, and then tighten
them. Note: Torque the Screws to 340 in-lbs.
Attach the Left Handrail Assembly (112) as described
above.
50
50
86
86
93
109
Wire
Wire
112
113
8
Console
Assembly
134
134