11
9. Connect the pulse wires from the Left and Right
Handrail Assemblies (112, 113) to the pulse wires from
the Console (103). Insert the included ties through the
tie blocks attached to the back of the Console Base
(109). Loop the ties around the pulse wires, Upright
Wire (116), and TV Cable (130) and tighten the ties
around the wires.
Insert all wires and cables into the top of the Upright
(93).
10. Attach the Console Base Back (107) with nine #8 x 1/2"
Screws (88) and two #8 x 3/4" Screws (86) as shown.
Be careful not to overtighten the Screws.
103
93
116
130
93
Ties
Tie
113
112
Pulse
Wires
107
88
88
86
86
88
88
9
10
11. After the incline trainer is placed in the location where
it will be used (see HOW TO MOVE THE INCLINE
TRAINER on page 13), make sure that both Rear
Leveling Feet (38) and the Base Pads (not shown)
rest firmly on the floor. If the incline trainer rocks even
slightly, turn one of the Rear Leveling Feet clockwise or
counterclockwise until the rocking motion is eliminated.
Plug the Power Cord (118) into the Frame (22) and at-
tach the Power Cord Bracket (64) with two #10 x 1/2"
Screws (34).
118
22
34
34
38
11
64
109
Содержание FMTK74810.0
Страница 37: ...37 NOTES ...