manualshive.com logo in svg

Freefly MoVI, Руководство пользователя

Поделиться
Скачать
Freefly MoVI Скачать руководство пользователя страница 4

Any MōVI M5, M10, or M15 can be configured to work with the MōVI 

Controller. The MōVI must have firmware version 3.08 or later. The latest 

MōVI firmware, release notes, and update instructions are available at 

www.freeflysystems.com.

Once running firmware v3.08 or later, change the MōVI Radio Type from 

the default (DSMX 2048) to MōVI Controller. This can be done from any of 

the Freefly Configurator apps (PC, Mac, Android) in the Remote Controller 

Config menu.

The values of the other parameters in this menu (Map Remote Mode, etc.) 

do not matter for this Radio Type and can be left at their defaults.

After installing the MōVI Controller Receiver (see Receiver Installation 

section below, or the Quick Start guide included in the package) and 

configuring the MōVI Radio Type as above, the MōVI Controller is ready to 

send commands and receive data from the MōVI. As with the Spektrum 

DX7/DX8 remote controller, the feel of the joystick can be adjusted from 

the Remote Operator Config menu.

MōVI CONFIGURATION:

Содержание MoVI































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды