Freedom9 freeGuard 100, Руководство по интерфейсу командной строки

Страница: 27 / 310

20
The IP address is displayed in the configuration file in dotted decimal format.
Editing the configuration file
You can change the freeGuard 100 configuration by backing up the configuration file to a TFTP server.
Then you can make changes to the file and restore it to the FreeGuard 100.
•
Use the execute backup config command to back up the configuration file to a TFTP server.
•
Edit the configuration file using a text editor.Related commands are listed together in the
configuration file. For instance, all the system commands are grouped together, all the antivirus
commands are grouped together and so on. You can edit the configuration by adding, changing or
deleting the CLI commands in the configuration file. The first line of the configuration file contains
information about the firmware version. Do not edit this line. If you change this information the
freeGuard 100 will reject the configuration file when you attempt to restore it.
•
Use the execute restore config command to copy the edited configuration file back to the
freeGuard 100. The freeGuard 100 receives the configuration file and checks to make sure the
firmware version and model information is correct. If it is, the freeGuard 100 loads the configuration file
and checks each command for errors. If the freeGuard 100 finds an error, an error message is
displayed after the command and the command is rejected. Then the freeGuard 100 restarts and
loads the new configuration.
Setting page length
Using the
config console
command you can specify the CLI page length.
For example in the
config console
shell, you can use the command
set page 30
to specify a
page length of 30 lines. This means that commands that display multiple lines of output, display 30
lines at a time. The default page length is 25 lines.
Changing the baud rate
Using
set baudrate
in the
config system console
shell, you can change the default console
connection baud rate. For more information on setting the console baud rate, see * “console” on
page 231 .
Note: Changing the default baud rate is available for FreeGuard 100s with BIOS 3.03 and higher and
OS version 2.50 and higher.
Using Perl regular expressions
Some freeGuard 100 features, such as spam filtering and web content filtering can use either
wildcards or Perl regular expressions.
See http://www.perldoc.com/perl5.8.0/pod/perlre.html for detailed information about using Perl regular
expressions.
Some differences between regular expression and wildcard pattern matching
In Perl regular expressions, ‘.’ character refers to any single character. It is similar to the ‘?’ character
in wildcard pattern matching. As a result:
•
freedom9.com not only matches freedom9.com but also matches freedom9acom, freedom9bcom,
freedom9ccom and so on.